BDX - 2015-2019 SOTF installUpdated a year ago

Step 1. After mounting your switch on the dash, you will run the harness through the fire wall. Into the engine bay.

Step 2. Locate the harness in the engine bay and pull it through with out causing tension. You will now put the YELLOW and White wire in to the connector like so

Step 3 : Locate your factory Fuel Temperature Sensor and unplug it.

Step 4) You will now plug the temp sensor harness in to the SOTF Connector

Step 5 : Zip-tie everything in place and clean up install before taking it out for a test drive

If you run into any issues, please open a customer support ticket here