EZ LYNK DELETE TUNER INSTRUCTIONS | 6.7L & 3.0LUpdated 2 months ago
RAM/CUMMINS/DODGE
Attached to this card are instructions for your Ezlynk delete tuner. Please read through these instructions and follow them carefully!
Let's first start off with a video. Watch the video FULL first to understand how the process will go.
The remaining parts of this article will provide you with more details, written instructions and related articles to help you with your Ez Lynk install!
VIDEO INSTALLATION GUIDE FOR 6.7L's
Now, this video below is on a 2019-2021 Cummins model.
The process of installing on 2013-2018 is identical.
For earlier models, please scroll down for the next video.
VIDEO INSTALLATION FOR A 2010-2012 6.7L
VIDEO INSTALLATION GUIDE FOR 3.0L's
The following video is for the 3.0L Ram Eco Diesels.
Written Instructions
Great! Assuming you watched the ENTIRE video, lets move on to more info!
Down below you can download our written instructions if you wish to have the PDF Version
CLICK THE LINK DOWN BELOW TO DOWNLOAD THE WRITTEN INSTRUCTIONS FOR THE 6.7L MODEL
CLICK ME FOR EZLYNK WRITTEN INSTRUCTIONS.
For ECODIESEL 3.0L Models
Connect to a technician
If your device is not auto linked, or the device prompts you to connect to a technician, please review this article :
BYPASS CABLE INFO
( ONLY 2018+ CUMMINS MODELS)
The Bypass cable is only required on the 2018+ cummins models. This applicable on both 3.0L and 6.7L models that are 2018+.
Please note, if you have the 2018+ model , this step is mandatory otherwise your Ezlynk will not install. The most common issue with the Ez Lynk installation is the bypass cable, if not connected correctly, the tunes will not take and the device will show "no vehicle shown".
Click me for more info on how to install Bypass cable!
Unplug The Air Throttle Valve
On each year model, you will be required to unplug the Air Intake Throttle valve.
Make sure to "unplug" the intake air throttle valve" or it may stick closed and the truck won't run right or REV up. The intake air throttle valve is located on the driver side of the motor underneath the intake by the intercooler pipe. It can be complicated to locate and "unplug" if you have never unplugged one before.
You want to keep the Air intake Throttle valve unplugged indefinitely, do not plug it back in, this will remain unplugged
Click me for more info on the Air Intake Throttle Valve
SOTF SWITCH INSTALLATION
for shifting on the fly instructions, please click here :
CLICK ME FOR SOTF INSTRUCTIONS
Need Help?
Hopefully this article has been super helpful to you. If you need addtional support/help or maybe you have run into a technical issue... Please reach out to our support team directly via our support form
Click me To Create A Support Ticket
Here are some other and more helpful resources within our Support Center
1. Click me More Ez Lynk Information
2. Bought a full delete kit, Not sure where to start? Click me For More Help on FULL Delete kit installation!
3. Looking to delete your hard parts? Click me for more info
4. Looking for this exact product? Click me for the ezlynk!
5. Need Techs email to link up device? Click me
5. Visit Ez lynk's Official Website for further features and functionalities Click me For Ez Lynk Official Site